Highbanker Legs Kit (4)
Highbanker Legs kits to make your own DIY gold mining machine a reality.
Each kit includes both 5/32” rivets AND stainless steel bolts with lock nuts giving you all the hardware you need to install the legs however you please. Rust free.
Check out the video for more details and an installation walkthrough.
Legs are 23.5" long with large 3/16" thick pads tig-welded to the bottom. The legs kits have a built in 3 degrees lean in angle to give the legs a slightly wider stance while not leaning in so far as to interfere with your hopper when they are retracted. New and improved legs kits come with specially designed guide holes for the legs to allow even less effort to tighten the legs into place, and prevent you from loosing the thumb screws by welding the first threads together.
(the brackets in these images have an 8 degrees lean in angle since they are attacked to a sluice with a 5 degrees lean out on the box. The legs sit at the 3 degree angle you will see on a standard sluice with vertical sides)
Highbanker Legs kits to make your own DIY gold mining machine a reality.
Each kit includes both 5/32” rivets AND stainless steel bolts with lock nuts giving you all the hardware you need to install the legs however you please. Rust free.
Check out the video for more details and an installation walkthrough.
Legs are 23.5" long with large 3/16" thick pads tig-welded to the bottom. The legs kits have a built in 3 degrees lean in angle to give the legs a slightly wider stance while not leaning in so far as to interfere with your hopper when they are retracted. New and improved legs kits come with specially designed guide holes for the legs to allow even less effort to tighten the legs into place, and prevent you from loosing the thumb screws by welding the first threads together.
(the brackets in these images have an 8 degrees lean in angle since they are attacked to a sluice with a 5 degrees lean out on the box. The legs sit at the 3 degree angle you will see on a standard sluice with vertical sides)
Highbanker Legs kits to make your own DIY gold mining machine a reality.
Each kit includes both 5/32” rivets AND stainless steel bolts with lock nuts giving you all the hardware you need to install the legs however you please. Rust free.
Check out the video for more details and an installation walkthrough.
Legs are 23.5" long with large 3/16" thick pads tig-welded to the bottom. The legs kits have a built in 3 degrees lean in angle to give the legs a slightly wider stance while not leaning in so far as to interfere with your hopper when they are retracted. New and improved legs kits come with specially designed guide holes for the legs to allow even less effort to tighten the legs into place, and prevent you from loosing the thumb screws by welding the first threads together.
(the brackets in these images have an 8 degrees lean in angle since they are attacked to a sluice with a 5 degrees lean out on the box. The legs sit at the 3 degree angle you will see on a standard sluice with vertical sides)
The legs are Tig welded 6061 structural aluminum with large 3" diameter foot pads to minimize settling when mining soft ground. The brackets are sturdy 12 gauge 304 stainless steel. The bolts are stainless steel and come with large thumb screws for easy tool-free adjustments.